HARRYBILT ENGINEERING POLE CALIPER
POLE CALIPER
The pole caliper is designed to provide accurate diameter measurements on poles up to 600mm.
This is specifically valuable in the maintenance program for timber power poles.
Stand alone machine
THE RANGE
HARRYBILT ENGINEERING Hi Rail Dumper
Harrybilt Engineering has developed a Triple Gauge and Dual Gauge Rail System designed specifically for the Wacker Neuson DV90 base machine.
The Friction Drive System converts wheeled dumpers for rail applications, enabling seamless operation on both road and rail networks.
Retractable rail wheel assemblies installed on the dumper positioning the vehicle on the rail, allowing the rear tyres continue to provide traction and braking, whilst providing train stop clearance. The rear end has a mechanical twist mechanism to suit the rail regulator’s requirements. All four rail wheels are fitted with park brakes to prevent “runaways”, as well as service brakes to make the unit more agile & productive.
All controls will be operated from the driver’s cabin. All hydraulic components are matched to the dumper’s specifications for flow rate, operating pressure and temperature.
HARRYBILT ENGINEERING Hirail Trucks
The Rail wheels can be set to either Narrow, Standard or Broad Gauge and are propelled by hydraulic motors installed within the rail system. Excavators are rigorously commissioned and tested so every Hi Rail Machine is Rail Ready when it leaves the workshop.
LEOTECH Dust Canon
A nebulised jet dust suppression machine, provided with an internal combustion engine driving a high pressure pump. High pressure water is delivered to a spraying head with up/down and left/right electrically operated movements. The water jet is released at a proper height for safety reasons and to not disturb the operators on site.
MOTOFOG just needs a water supply to be ready to work. The operating costs are greatly reduced, because there is no need for additional power generators. The transport costs are as well reduced, thanks to its lightweight and compactness.
MOTOFOG with DUAL JET is a highly flexible solution which suits operator’s needs perfectly. The provided nozzles, through a simple operation, allow the selection of different spray patterns which can deliver either the long range or a wide coverage, according to the specific needs.