Antraquip Drum Cutter – Axial (inline)

/

Product Overview

Antraquip Hydraulic Cutters are the solution for your next project involving trenching, general rock excavation, controlled demolition, scaling, profiling, soil remediation, frozen ground cutting, tunneling, rock dredging, and many other applications.

Key Features

Little or no micro cracking of the ground outside the excavation line. (Cracking from hammers has been shown to reach up to 2m, depending on rock type). This can cause issues with existing infrastructure.
Minimised overbreak of trench line.
Minimal disturbance of trench face making for a safer more intact trench.

Lower noise impact than other methods.
Lower vibration impact.
Ability to reuse the material onsite as hardfill, thus reducing waste and increasing site efficiency.
Extremely reliable tools and Antraquip also have a range of Soft Soil mixing attachments which have used in NZ for Mud-Crete.

Specifications

	UNITS	AQ-1S	AQ-1	AQ-2	AQ-1L	AQ-2L	AQ-3L	AQ-4L	AQ-3	AQ-3XL	AQ-4	AQ-4XL	AQ-5	AQ-6
Cutting Head Diameter	in (mm)	9 (230)	11 (280)	15 (380)	15 (380)	16 (405)	19 (485)	26 (660)	22 (560)	23 (585)	25 (635)	28 (710)	33 (840)	40 (1,015)
Cutting Head Width	in (mm)	19 (485)	21 (535)	25 (635)	15 (380)	16 (405)	19 (485)	26 (660)	31 (790)	32 (815)	40 (1,015)	49 (1,245)	53 (1,345)	68 (1,730)
Displacement 1	RPM	150 RPM @ 7 GPM	100 RPM @ 7 GPM	95 RPM @ 16 GPM	95 rpm @ 16 gpm	80 rpm @ 32 gpm	80 rpm @ 32 gpm	70 rpm @ 58 gpm	80 RPM @ 32 GPM	80 RPM @ 40 GPM	70 RPM @ 58 GPM	75 RPM @ 80 GPM	65 RPM @ 96 GPM	52 RPM @ 185 GPM
	L/MIN	150 RPM @ 25 L/MIN	100 RPM @ 30 L/MIN	95 RPM @ 60 L/MIN	95 rpm @ 60 l/min	80 rpm @ 121 l/min	80 rpm @ 121 l/min	70 rpm @ 219 l/min	80 RPM @ 121 L/MIN	80 RPM @ 140 L/MIN	70 RPM @ 219 L/MIN	75 RPM @ 299 L/MIN	65 RPM @ 363 L/MIN	52 RPM @ 700 L/MIN
Displacement 2	RPM	160 RPM @ 11 GPM	115 RPM @ 18 GPM	90 RPM @ 25 GPM	90 rpm @ 25 gpm	85 rpm @ 43 gpm	85 rpm @ 43 gpm	75 rpm @ 82 gpm	85 RPM @ 43 GPM	85 RPM @ 50 GPM	75 RPM @ 82 GPM	70 RPM @ 110 GPM	60 RPM @ 135 GPM	45 RPM @ 235 GPM
	L/MIN	160 RPM @ 40 L/MIN	15 RPM @ 60 L/MIN	90 RPM @ 95 L/MIN	90 rpm @ 95 l/min	85 rpm @ 163 l/min	85 rpm @ 163 l/min	75 rpm @ 310 l/min	85 RPM @ 163 L/MIN	85 RPM @ 189 L/MIN	75 RPM @ 310 L/MIN	70 RPM @ 416 L/MIN	60 RPM @ 510 L/MIN	45 RPM @ 888 L/MIN
Oil Flow Range	GPM (L/min)	5 – 12 (20 – 45)	R8C48 – 20 (30 – 75)	12 – 26 (45 – 100)	15 – 30 (55 – 115)	30 – 45 (110 – 170)	30 – 45 (110 – 170)	50 – 95 (190 – 360)	30 – 45 (110 – 170)	34 – 65 (125 – 245)	50 – 85 (190 – 320)	65 – 130 (245 – 495)	95 – 160 (360 – 610)	175 – 260 (660 – 985)
Max Pressure	PSI (bar)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)	5,800 (400)
Max Torque Output	ft lbs (Nm)	1,196 (1,620)	2,625 (3,560)	4,370 (5,925)	4,370 (5,925)	8,740 (11,850)	8,740 (11,850)	19,690 (26,700)	8,740 (11,850)	11,200 (15,185)	19,690 (26,700)	28,120 (38,125)	39,310 (53,300)	99,600 (135,040)
Max Cutting Force	lbs (N)	3,315 (14,750)	5,717 (25,440)	7,028 (31,275)	7,028 (31,275)	13,125 (58,405)	11,050 (49,175)	18,204 (81,010)	9,545 (42,475)	11,683 (51,990)	18,933 (84,250)	24,068 (107,105)	28,686 (127,655)	62,112 (276,400)
Weight	lbs (Kg)	230 (105)	495 (225)	1,010 (460)	750 (340)	810 (370)	925 (420)	2,980 (1,350)	2,045 (930)	2,290 (1,040)	4,020 (1,825)	4,900 (2,220)	7,400 (3,355)	14,350 (6,510)
Maximum Input Power	HP (kW)	24 (20)	45 (35)	60 (45)	60 (45)	90 (65)	90 (65)	160 (120)	90 (65)	120 (90)	160 (120)	215 (160)	270 (200)	540 (405)
Carrier Weight	tons	1-3	2-8	5-15	4-15	25-10	25-10	20 – 60	12-20	15 – 28	25 – 45	40 – 70	50 – 80	85 – 180
Engine Power of Carrier	HP (kW)	13 – 45 (10 – 35)	15 – 60 (10 – 45)	25 – 90 (20 – 65)	25 – 90 (20 – 65)	80 – 120 (60 – 90)	80 – 125 (60 – 95)	150 – 240 (110 – 180)	80 – 120 (60 – 90)	90 – 160 (65 – 120)	150 – 240 (110 – 180)	200 – 300 (150 – 225)	260 – 360 (195 – 270	470 – 805 (350 – 600)